|
Berlin concrete stand
30 kg; plastic stand tube with
adapter system - suitable for use with 26-55 mm poles. |
Hamburg concrete stand
38kg; with handle and rollers - with
adapter system - suitable for use with 26-55mm poles.
|
|
Rondo
sand-filled sunshade stand
This stand is equipped with a lower dish section, divided into
compartments which can be filled with sand. The lid is held in place
by the screw-in, break-resistant base tube. The entire unit, which is
highly robust and extremely firm, is designed for sunshade poles of up
to 62mm. Weight (unfilled): 8kg; weight when filled: 72kg; Ø 70 cm
|
|
Kiel concrete stand
Weights 70, 110 or 155kg -with side handles –
suitable for use with 50-70mm poles.
Available coloured in grey or terrakotta
|
Concrete stand Antik
Attraktiv Design.
Ø 70 cm; Weights 70kg; suitable for use with 50-70mm poles.
Available coloured in grey or terrakotta |
|
Concrete stand Hannover
including 4 wheels; Ø61 cm; Weights 60kg; suitable for use with
50-70mm poles.
Available coloured in grey or terrakotta |
Concrete stand Köln
Including 4 wheels; Ø 70 x 70 cm; Weights 120kg -with side
handles – suitable for use with 50-70mm poles.
Available coloured in grey or terrakotta
|
|
Concrete stand Bremen
White Aluminium body filled with concrete; Weight 100kg; with side
handles; Ø 78 cm; suitable for use with 50-70mm poles. |
Plate support stand
For use with four
40 x 40cm concrete flagstones. P 50 plate support stand for poles up
to 50mm, P 60 plate support stand for poles up to 60mm
|
|
Extra plate support stand
For use with four
40 x 40cm concrete flagstones. Also available - as option - with four
high quality guide rollers (with brake).
Extra PX 50 plate support stand for poles up to 50mm. Its possible to
fix the pole fitting tube in the middle or on the side of the frame
(for side pole shades)
|
Folding support stand
Portable fold-up stand, weighing only 13kg. Designed for shades with
exact 50mm pole.
Shades must be additionally secured in the event of wind
|
|
Stainless steel ground mounting sleeve Lasta
ned info om denna fot
Ground mounting sleeve with folding steel cover. The mounting sleeve
is embedded flush with the concrete floor and - with the cover shut -
avoids any danger of persons tripping up. The upper section of the
mounting sleeve is anchored to the lower part by means of a
bayonet-type connector. S 50 mounting sleeve for poles up to 50mm.
S 60 mounting sleeve for poles up to 60mm
|
|
Screw-in support stand
For fitting to concrete surfaces or solid wood floorboards.
ZA 50 for poles up to 50mm
|
Spike
For hammering into the ground.
ES 50 for 50 mm poles.
|
